Carbolite ABF 8/28 Manual do Utilizador

MF58 – 1.06

10 MF58 – 1.06 4.3 Temperature Control Calibration After prolonged use the controller and/or thermocouple could require recalibration. A qui

MF58 – 1.06

12 MF58 – 1.06 6.0 CIRCUIT DIAGRAMS & FUSES See wiring diagram 00348-1-5003 Fuses The following fuse types are present: Supply Fuses

MF58 – 1.06

14 MF58 – 1.06

MF58 – 1.06

Carbolite, Parsons Lane, Hope, Hope Valley, S33 6RB, England. Telephone: +44 (0)1433 620011 Fax: +44 (0)1433 621198 E-mail: [email protected] The pr

2 MF58 – 1.06 SUPPLIED ITEMS LIST Parts Supplied The following items should be present. These should all be checked and identified as soon as

MF58 – 1.06

4 MF58 – 1.06 2.0 ABF INSTALLATION 2.1 Tools Required 10mm spanner, 12mm spanner, cross point screwdriver, flat blade screwdriver. 2.2 Unp

MF58 – 1.06

6 MF58 – 1.06 2.5 Electrical Connections Connection by a qualified electrician is recommended. Model ABF 8/28 should be connected to drawi

MF58 – 1.06

8 MF58 – 1.06 Do not open the furnace door during an ashing procedure as combustion will be taking place within the chamber. 3.2 Tempera

MF58 – 1.06